Price:
US$
13.10
Loading...
Ship to
color:
if the goods arrival in 90 days,we will inform you by email!
Error appeared,Please try again later!
Questions & Answers
A Yes,it can work with air compressor.
I checked mine when I first got it. Time was pretty close to real time.
By T. Baker on April 24, 2018
No. Only the hours are displayed and counted... Sorry!
By Aaron Paul Thiessen on March 9, 2018
Yes, using the supplied ty wraps, wrap the inductive wire around one of the spark plugs if you have 2, 5 wraps worked for me. Secure in place with 2nd ty wrap. Run inductive wire to desired location, leave enough slack in wire to replace spark plug, slide inductive wire through meter and mount meter where desired. I us… see more Yes, using the supplied ty wraps, wrap the inductive wire around one of the spark plugs if you have 2, 5 wraps worked for me. Secure in place with 2nd ty wrap. Run inductive wire to desired location, leave enough slack in wire to replace spark plug, slide inductive wire through meter and mount meter where desired. I used Velcro on my riding mower and it works just fine vs drilling holes. Good luck. see less
By Tony on March 8, 2018
I didn't use mine for an outboard, but I don't see why you couldn't. I'm assuming you want the display mounted on the outside of the cowling, so you'll either have to run the wire through the cowling, between the gasket/cowling or through the gasket. Either will work. Another option would be to mount the display in th… see more I didn't use mine for an outboard, but I don't see why you couldn't. I'm assuming you want the display mounted on the outside of the cowling, so you'll either have to run the wire through the cowling, between the gasket/cowling or through the gasket. Either will work. Another option would be to mount the display in the front of the outboard low enough that you can run the wire between the exhaust column and the lower cowling. see less
By NH Hiker on February 15, 2018
Where did you come up with 20,000 hours? If that is what you believe, then please explain to me why my fist meter has been in use since 2005 and is still functioning.
By Miyuki Fukunaga on January 26, 2018
This doesn't measure RPM's. It measures time that the motor is in use. So, if you tune the saw based on hours being used then it will work.
By T. Baker on January 18, 2018
This doesn't appear to be resettable, I fitted it to a new outboard motor so that I have a record of its total run time and can schedule maintenance such as gearbox oil and pump impeller replacement. No frills but works well.
By Maurice on January 7, 2018
No
By fun5er on October 17, 2017
This works prefect for Honda 2000i. You take 2 screws out that hold carburetor on and mount this in same spot with same screws. It tells you RPM when motor is running and hours when motor is off. I love mine for keeping up with maintenance.
By CPC on September 10, 2017
It should work with anything that has a spark plug
By Curt B on August 28, 2017
Discussions
Please note that TOMTOP Forums are a community for all communicating and getting help each other. There will be some enthusiastic friends participate in your discussions. Of course TOMTOP customer service (with tomtop customer service icon) response is guaranteed ,which is the same way you contact us at http://www.tomtop.com/contacts
open this forum in full pageAverage Rating:
4.2based on 263 Customer Reviews
Share your thoughts with other customers and get Tomtop Points, the first 5 reviews get DOUBLE Tomtop Points!
Write a Customer ReviewBy Yui Akamatsu
November 10, 2020
By steffens
October 31, 2020
Just partially installed it to a new go kart engine we purchased. It worked immediately as designed/intended. When the engine goes in we will also decide on a permanent mounting location for it. Also if we have any issues in the future we'll report back, but so far happy with purchase!
By Yuki Takada
October 30, 2020
By Mari Yaguchi
August 30, 2020
By Susti
August 29, 2020
By misfitsailor
August 24, 2020
By Mike
November 1, 2020
By Daniel Willoughby
July 19, 2020
By Living Coast 2 Coast
July 1, 2020
By Robert J. Rogers
June 30, 2020
By fisk
June 25, 2020
By Charles Stewart
June 25, 2020
By Salt Air
June 14, 2020
By Jeff
June 12, 2020
It works great and seems to be tough. I have it on a wood splitter and the motor shakes like crazy and it's still going. I ended up screwing it to the air filter cover. I try to use doubled sided tape but that only held for a day. Very easy to install. It's great way to keep track of the hours for maintenance.
By Wile E Coyote
May 12, 2020
By Valerie Schuette
May 11, 2020
By UmmaGumma
May 11, 2020
By gp
May 9, 2020
By Upton
May 1, 2020
By Sebastian Krywult
April 30, 2020