The Mini power hub has been engineered to provide the highest possible performance and reliability in a 36 * 36mm & 4 layers PCB. The hub distributes power from a battery pack to 4 ESCs, as well as providing two synchronised & regulated DC outputs for powering cameras, servos, video transmitters, LEDs, etc. Batteries may range from 3S to 6S LiPo, and the BEC input is TVS protected. The hub also features convenient solder bridge of various voltage for camera & video TX.
Features:
2oz copper & 4-layers PCB
ESC & Battery solder tabs in pairs
DC/DC synchronous buck regulator, efficiency is up to 95%
5V & 12V Output LED indicators & Short circuit tolerant
Solder Bridges of various voltage for Camera & VTX, can be very convenient for different voltadge inputs of electronic components
TVS(Transient Voltage Suppressor) protection for DC/DC chip, decrease risk of demage to electronic components due to the burst voltage
Description:
General specifications:
Input voltage range (2S-6S operation): 7.2 - 26V DC
Regulated 5V and 12V outputs
LED power indicators ( 5V & 12V outputs )
4 ESC outputs
Dimensions: 36 * 36mm
Weight: 6g
Mounting holes 30.5mm square spacing
ESC outputs:
Continuous current: 20A per output
Burst current (10 seconds/minute): 30A per output
BEC 5V output:
Designed for RC Receivers, Flight controllers, OSD, and Servos.
Voltage: 5.0 +/- 0.1VDC
Continuous current: 3A
Short-circuit tolerant (10 seconds/minute)
LED (indicates voltage is in regulation, within 10%)
BEC 12V output:
The battery should be 4S~6S LiPo
Standard output designed to power cameras and video transmitters,etc.
Voltage: 12.0 +/- 0.2VDC
Continuous current: 2 Amps (Max.3A 10s/minute)
Short-circuit tolerant (10 seconds/minute)
LED (indicates voltage is in regulation, within 10%)
CAM & VTX voltage bridge:
3S operation, choose "VCC" for 12V camera & 12V VTX, VCC=Battery Voltage
4~6S operation, choose "12" for 12V camera & 12V VTX
3~6S operation, choose "5" for 5V camera
Video pass through from the "CAM" pad to the "VTX" pad
Package Information:
Package size: 9 * 8 * 1cm / 3.6 * 3.2 * 0.4in
Package weight: 11g / 0.38oz
Adhesive tape package
Package List:
1 * Power Distribution Board PDB 4-Layers PCB