With this top quality guitar transmitter receiver wireless system, you can walk anywhere without a long cable and have fun with audience.
Features:
Guitar wireless transmitter receiver system, for electric guitar free stage performance.
UHF 600-870 MHz band and latest high frequency filter of the RF to avert frequency interference.
PLL system, preset 16 non-interfered channels.
Special design commanding circuit, strongly improve S/N ratio.
Automatic frequency scan feature searches for available frequencies.
Longest distance in open: 60m / 200ft, ideal distance in open: 40m / 130ft.
Twice mixer high frequency circuit design, very strong sensitivity.
Using surface amount technology for PCB, more stable function.
The receiver support DC power supply and AA batteries.
With a foam-padded plastic box for carrying and protecting all the components.
Specifications:
1. Receiver:
Frequency range: 600MHz-870MHz
Modulation type: F3E
Oscillator system: PLL circuit
Operation distance: About 60m / 200ft
De-emphasis: 50 u/sec
Operation temperature: 0℃±50℃
Storage temperature: -20℃±70℃
receiving sensitivity: Sina>30dB 10dBuV
Squelch sensitivity: 17dBuV±4dBuV
S/N ratio: (f1KHz=1mV)95dB(A)
Audio output level at div.f15 KHz: (F40KHz)800Mv
THD(at SG output 56 dBuV): (f1KHz=1mV)<0.8%
Output impedance: 5K-10K ohms
Power: DC9V / 3VAA
Current consumption: 9V / 60mA 3V / 100mA
antenna: Dual 1/4 wave length rod antennas
Controls: Audio level volume, channel select switch, ACT key
Display: ACT SEND(white), Power(red), Low Power(orange), Signal(green)
2. Transmitter:
Type: Bending angle
RF output power: 10dB±1dB
Spurious: -50dBm
Modulation factor: 40KHz
Pre-emphasis: 50usec
Maximum input level: +2dBV
Input impedance: 20K ohms
THD: <0.8% (1KHz 100mV)
Audio frequency response: 50Hz-20KHz±3dB
Operating power voltage: 1.5V typical, 1.1V minimum, 2V max
Current consumption: 80mA
Power: 1.5V (AAA size battery)
Antenna: Permanently attached 1/4 wave length wire
Controls: Power switch, 15Db pad switch
Indicators: Power on(LED on), Low battery(LED flash when battery less than 1.1v), ACT(LED on)
3. Power Adapter:
Input: 220V 50Hz 150mA
Output: 10.5V 200mA
Plug type: US / UK / EU (optional)
4. Audio cable:
Type: Unbalanced interface
Length: Approx. 90cm / 35in
Package Size: 27 * 22 * 7.5cm / 10.6 * 8.7 * 3in
Package Weight: 993g / 35oz
Package List:
1 * Receiver
1 * Transmitter
1 * Power Adapter
1 * Audio Cable
1 * Operation Manual (English & Chinese)
Note:
The batteries are not included.
One operational manual for your use convenience.