Dynam DETRUM Istone DSM 6-Axis Gyro & Stabilizer and 3-in-1 ESC Program Card Battery Voltmeter Combo for RC Airplane Aircraft

The Detrum Istone DSM (ISTONE-AII) is a 6-axis Gyro & Stabilizer for airplane. It is suitable for normal wing, fly-wing, and V-tail airplanes with normal mode, gyro mode, aerobatic mode and auto balance mode. Compatible with DSM, S.BUS, and PWM receivers. You can set the programmable items via a 3-in-1 program card.
The 3-in-1 program card is used to set the programmable items for ESCs and stabilizers and measure the voltage for Li-Po battery. Its friendly LCD interface makes the programming and measurement easy.







Features:
DSM 6-Axis Gyro & Stabilizer support DSM2/DSMX, Futaba S.BUS and PWM receiver.
High-performance 32-bit ARM core processor, 6-axis sensor chipset.
Self-developed attitude estimation algorithm and attitude control algorithm.
Support normal wing, fly-wing, and V-tail airplanes; Support 3D aircraft.
You can change the flight modes quickly by switching the channels during flight.
There are four intelligent flight modes: normal mode, gyro off mode, aerobatic mode and auto balance mode.
With auto balance mode, when operating in this mode, the airplane will maintain level flight automatically.
The stabilizer is super small size, support forward, backward, and side mounted.
The parameters must be set via Detrum 3in1 the programming card, including mounting direction, wing type, flight mode, level offset and the gain.

3-in-1 Program Card:
Connect with the ESC to set its programmable items. It is applicable for Skylord Advanced series brushless aircraft ESCs, Volcano series brushless car ESCs, etc. 
Connect with the stabilizer or sport receiver (with a built-in stabilizer) to set its programmable items. It is applicable for Detrum DSM ISTONE-AII stabilizer, MSR66A sport receiver, etc.
Work as a voltmeter to measure the voltage of the whole battery pack and each cell. It is suitable for 2S to 8S Li-Po battery.
Directly get power from the peripherals, no need to provide power source independently.
It can automatically identify the connected peripherals. Very simple to use.

Specifications:
Brand Name: DETRUM
ISTONE-AII Stabilizer:
Main Controller: 32-bit MCU
Sensor: 6-axis gyro
Input Voltage: 4.8 to 7.4V
Gyro Scale Range: -2000dps ~ +2000dps
Accelerometer Scale Range: -4g ~ +4g
Input Signal: PWM, Futaba S.Bus, DSM
Output Signal: PWM (71.4Hz)
Operating Temp: -20 ℃ ~ 70 ℃
Size: 36.5 * 29.4 * 12.6mm
Weight: About 10g

3-in-1 Program Card:
Input Voltage: 5 to 12V
Interface: Micro USB, ESC interface, Li-Po battery interface
Size: 85 * 50 * 16mm
Weight: About 46g

Package information:
Package size: 11 * 11 * 6cm / 3.3 * 4.3 * 2.36in
Package weight: 145g / 5.1oz
Poly bag package

Package list:
1 * Istone DSM 6-Axis Gyro & Stabilizer
1 * 3-signal Wire
2 * Anti-shock Double Sided Tape
2 * Single-signal wire
1 * Detrum 3-in-1 Program Card
1 * Micro USB Connected Cable
2 * English Manual