Favorites
0Cart
Hantek MSO5202D Mixed Signal 200MHz 2CH 1Gsa/s 1M Digital Storage Oscilloscope 16CH Logic Analyzer

Hantek MSO5202D Mixed Signal 200MHz 2CH 1Gsa/s 1M Digital Storage Oscilloscope 16CH Logic Analyzer ( Item#: E1568US )

Ship From:

  • China Warehouse

Dispatch:Usually will be shipped inbusiness dayshours

Shipping: Loading...
Sorry, it seems that there are no available shipping methods for your location. Please contact us for further assistance.

Loading...

Ship to

Anguilla
Stock in: china

plug:us

  • us

QTY:

Wholesale Inquiry
The mixed signal oscilloscope can put the invisible power to the naked eye the electrical signals into visible image, convenient for people to study the changing process of various electrical phenomena. This item is a great combination of 16 channels logic analyzer and 2 channels oscilloscope.

Features:
Integrated instrument of 16 channels logic analyzer + 2 channels oscilloscope + external trigger.
Large and clear display (7.0-inch color LCD, high resolution 800*480) to show lifelike waveform.
1GSa/s real time sampling rate.
USB host, support flash memory card storage and USB interface system upgrade.
Ultrathin and compact design for portable use.

Oscilloscope Function:
Bandwidth 200MHz.
Each channel record length up to 1M.
Real time sampling rate up to 1GSa/s.
Powerful trigger function.
32 kinds of automatic measurement function.

Logic Analyzer Function:
16 channels divided into 2 groups which is able to setup threshold level individually.
Real time sampling rate up to 500MSa/s.
Powerful trigger function: edge, duration, pulse width, code-type, queue, repeat.

Specifications:
Model MSO5202D
Acquisition
Sample Rate Real-Time Sample: 1GS/s
Acquisition Modes
Normal Normal data only
Peak Detect High-frequency and random glitch capture
Average Waveform Average, selectable 4,8,16,32,64,128
Inputs
Inputs Coupling AC, DC, GND
Inputs Impedance 1MΩ±2% ‖20pF±3pF
Probe Attenuation 1X, 10X
Supported Probe Attenuation Factor 1X, 10X, 100X, 1000X
Maximum Input Voltage

CAT I and CAT II: 300VRMS (10×), Installation Category;
CAT III: 150VRMS (1×);
Installation Category II: derate at 20dB/decade above 100kHz to 13V peak AC at 3MHz* and above. For non-sinusoidal waveforms, peak value must be less than 450V. Excursion above 300V should be of less than 100ms duration. RMS signal level including all DC components removed through AC coupling must be limited to 300V. If these values are exceeded, damage to the oscilloscope may occur.

Horizontal System
Sample Rate Range 500MS/s--1GS/s
Waveform Interpolation (sin x)/x
Record Length 1M
SEC/DIV Range 2ns/div to 40s/div, in a 2, 4, 8 sequence,
Sample Rate and Delay Time Accuracy ±50ppm(at over any ≥1ms time interval)
Position Range 2ns/div to 10ns/div;
(-4div x s/div) to 20ms;
Delta Time Measurement Accuracy(Full Bandwidth) Single-shot, Normal mode:± (1 sample interval +100ppm × reading + 0.6ns);
>16 averages:± (1 sample interval + 100ppm × reading + 0.4ns);
Sample interval = s/div ÷ 200
Vertical System
Vertical Resolution 8-bit resolution, all channel sampled simultaneously
Position Range 2mV/div to 10V/div
Bandwidth 200MHz
Rise Time at BNC(typical) 1.8ns
Analog Bandwidth in Normal and Average modes at BNC or with probe, DC Coupled 2mV/div to 20mV/div, ±400mV; 50mV/div to 200mV/div, ±2V
500mV/div to 2V/div, ±40V; 5V/div, ±50V
Math +, -, *, /, FFT
FFT Windows:Hanning,Flatop, Rectamgular,Bartlett,Blackman;
1024 sample point
Bandwidth Limit 20MHz
Low Frequency Response(-3db) ≤10Hz at BNC
DC Gain Accuracy ±3% for Normal or Average acquisition mode, 10V/div to 10mV/div;
±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div
DC Measurement Accuracy, Average Acquisition Mode When vertical displacement is zero, and N ≥16:± (3% × reading + 0.1div + 1mV) only 10mV/div or greater is selected;
When vertical displacement is not zero, and N≥16: ± [3% × (reading + vertical position) + 1% of vertical position + 0.2div]; Add 2mV for settings from 2mV/div to 200mV/div; add 50mV for settings from 200mV/div to 10V/div
Volts Measurement Repeatability, Average Acquisition Mode Delta volts between any two averages of ≥16 waveforms acquired under same setup and ambient conditions
Trigger System
Trigger Types Edge, Video, Pulse, Slope, Over time, Alternative
Trigger Source CH1, CH2, EXT, EXT/5, AC Line
Trigger Modes Auto, Normal, Single
Coupling Type DC, AC, Noise Reject, HF Reject, LF Reject
Trigger Sensitivity(Edge Trigger Type) DC(CH1,CH2):
1div from DC to 10MHz;1.5div from 10MHz to 100MHz; 2div from 100MHz to Full;
DC(EXT): 200mV from DC to 100MHz; 350mV from 100MHz to 200MHz;
DC(EXT/5): 1V from DC to 100MHz;1.75V from 100MHz to 200MHz;
AC: Attenuates signals below 10Hz;
HF Reject: Attenuates signals above 80kHz;
LF Reject: Same as the DC-coupled limits for frequencies above 150kHz; attenuates signals below 150kHz
Trigger Level Range CH1/CH2: ±8 divisions from center of screen;
EXT: ±1.2V;
EXT/5:±6V
Trigger Level Accuracy(typical) Accuracy is for signals having rise and fall times >=20ns CH1/CH2: 0.2div × volts/div within ±4 divisions from center of screen;
EXT: ± (6% of setting + 40mV);
EXT/5: ± (6% of setting + 200mV);
Set Level to 50%(typical) Operates with input signals ≥50Hz
Video Trigger
Video Trigger Type CH1, CH2: Peak-to-peak amplitude of 2 divisions;
EXT: 400mV;
EXT/5: 2V
Signal Formats and Field Rates, Video Trigger Type Supports NTSC, PAL and SECAM broadcast systems for any field or any line
Holdoff Range 100ns ~ 10s
Pulse Width Trigger
Pulse Width Trigger Mode Trigger when (< , >, = , or ≠); Positive pulse or Negative pulse
Pulse Width Trigger Point Equal: The oscilloscope triggers when the trailing edge of the pulse crosses the trigger level.
Not Equal: If the pulse is narrower than the specified width, the trigger point is the trailing edge. Otherwise, the oscilloscope triggers when a pulse continues longer than the time specified as the Pulse Width.
Less than: The trigger point is the trailing edge.
Greater than (also called overtime trigger): The oscilloscope triggers when a pulse continues longer than the time specified as the Pulse Width
Pulse Width Range 20ns ~ 10s
Slope Trigger
Slope Trigger Mode Trigger when (< , > , = , or ≠ ); Positive slope or Negative slope
Slope Trigger Point Equal: The oscilloscope triggers when the waveform slope is equal to the set slope.
Not Equal: The oscilloscope triggers when the waveform slope is not equal to the set slope.
Less than: The oscilloscope triggers when the waveform slope is less than the set slope.
Greater than: The oscilloscope triggers when the waveform slope is greater than the set slope.
Time Range 20ns ~ 10s
Overtime Trigger
Over Time Mode Rising edge or Falling edge
Time Range 20ns ~ 10s
Alternative Trigger
Trigger on CH1 Internal Trigger: Edge, Pulse Width, Video, Slope
Trigger on CH2 Internal Trigger: Edge, Pulse Width, Video, Slope
Trigger Frequency Counter
Readout Resolution 6 digits
Accuracy (typical) ±30ppm (including all frequency reference errors and ±1 count errors)
Frequency Range AC coupled, from 4Hz minimum to rated bandwidth
Signal Source Pulse Width or Edge Trigger modes: all available trigger sources
The Frequency Counter measures trigger source at all times, including when the oscilloscope acquisition pauses due to changes in the run status, or acquisition of a single shot event has completed.
Pulse Width Trigger mode: The oscilloscope counts pulses of significant magnitude inside the 1s measurement window that qualify as triggerable events, such as narrow pulses in a PWM pulse train if set to < mode and the width is set to a relatively small time.
Edge Trigger mode: The oscilloscope counts all edges of sufficient magnitude and correct polarity.
Video Trigger mode: The Frequency Counter does not work.
Measurement
Cursor Measurement Voltage difference between cursors: △V
Time difference between cursors: △T
Reciprocal of △T in Hertz (1/ΔT)
Auto Measurement Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH, FRF, FFR, LRR, LRF, LFR, LFF
Logic Analyzer Specifications
Channels 16 Channels
Max. Input Impedance 200K(C=10p)
Input Voltage Range -60V~60V
Logic Threshold Range -8V~8V
Max. Sample Rate 500MHz
Compatible Input TTL, CMOS, ECL
Sample Depth 512K
Trigger
Edge Trigger D0-D15 select slope (rising or falling edge)
Pulse Width D0-D15 select pulse polarity (positive or negative pulse), trigger when (=, ≠, >, <), trigger pulse width
Code-type D0-D15 select code-type (H, L, X)
Duration D0-D15 select persist time and trigger when (data terminate, data start, and data delay)
Queue D0-D15 select specific data index (0-3) and code-type (H, L, X)
Repeat D0-D15 select code-type (H, L, X) and repeat times
General Features
Display
Display Type 7 inch 64K color TFT (diagonal liquid crystal)
Display Resolution 800 horizontal by 480 vertical pixels
Display Contrast Adjustable (16 gears) with the progress bar
Probe Compensator Output
Output Voltage (typical) About 5Vpp into ≥1MΩ load
Frequency(typical) 1kHz
Power Supply
Supply Voltage 100-120VACRMS(±10%), 45Hz to 440Hz, CATⅡ
120-240VACRMS(±10%), 45Hz to 66Hz, CATⅡ
Power Consumption <30W
Fuse 2A, T rating, 250V
Environmental
Temperature Operating: 32℉ to 122℉ (0℃ to 50℃);
Non-operating: -40℉ to 159.8℉ (-40℃ to +71℃)
Cooling Method Convection
Humidity +104℉ or below (+40℃ or below): ≤90% relative humidity;
106℉ to 122℉ (+41℃ to 50℃): ≤60% relative humidity
Altitude Operating: Below 3,000m (10,000 feet);
Non-operating: Below 15,000m(50,000 feet)
Material: ABS
Plug Type: US / EU(optional)
Power Supply: AC230V(EU) / AC110V(US)
Oscilloscope Probe Model: PP-200
Item Size: Approx.31.5 * 12 * 15cm / 12.4 * 4.72 * 5.91in
Item Weight: 2.11kg / 4.65lb
Package Size: Approx.38 * 19.5 * 23.5cm / 14.96 * 7.68 * 9.25in
Package Weight: 3.10kg / 6.84lb

Package List:
1 * Digital Storage Oscilloscope
2 * Oscilloscope Probes(with accessories)
1 * USB Cable
1 * Logic Analyzer Cable
18 * Logic Analyzer Little Hooks
1 * Power Line
1 * Data CD

Shipping Methods:

When you order from TOMTOP.com, you will receive a confirmation email. Once your order is shipped, you will be emailed with the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process. TOMTOP.com offers different shipping methods for you:

Shipping from Chinese Warehouse:
Shipping Type Country Shipping Time
Airmail and register airmail United States,Canada 10-20 business days
Australia, New Zealand, Singapore 15-25 business days

United Kingdom, France, Spain, Germany, Netherlands, Japan, Belgium,

Denmark, Finland, Ireland, Norway, Portugal, Sweden, Switzerland

20-30 business days
Brazil and Mexico 20-35 business days
Russia 20-35 business days
Other countries 10-25 business days
Singapore & China (EMS) All countries except those listed below 6-10 business days
Brazil and Russia 10-25 business days
Expedited Shipping(DHL) Worldwide 3-7 business days

Shipping from Local Warehouses:
Warehouses Shipping Type Shipping Time Country
UK Warehouse Royal mail without tracking number 5-12 business days Can be delivered to UK & other EU countries.
UPS 3-7 business days
USA Warehouse Air mail with tracking number 5-12 business days Can only be delivered to America.
UPS 3-7 business days
DE Warehouse DHL 3-8 business days

Can be delivered to worldwide. (But its shipping cost varies from

different countries. Recommend to choose if you are in Europe.)

The transit time depends on where you're located and where your package comes from. If you want to know more information, please contact our customer service. We will settle your problem as soon as possible. Enjoy shopping!

Payment Methods:

TOMTOP.com accepts PayPal, Credit Card, Western Union, Wire Transfer, QIWI and Yandex as secure payment methods:

Global:

1. PayPal

1) Login To Your Account or use Credit Card Express.
2) Enter your Card Details, the order will be shipped to your PayPal address. And click “Submit”.
3) Your Payment will be processed and a receipt will be sent to your email inbox.

2. Credit Card

1) Choose your shipping address OR create a new one.
2) Enter your Card Details and click “Submit”.
3) Your Payment will be processed and a receipt will be sent to your email inbox.

3. Wire Transfer

For orders more than $500, please contact us and provide us with the following information: your order number, the total amount paid, and the exact date of the wire transfer.

4. Yandex

Яндекс.Деньги
Вы можете заплатить из кошелька в Яндекс.Деньгах или с привязаннойк нему карты. Комиссии нет.

5. QIWI

1) Выберите страну, где был открыт ваш счет
2) Введите номер вашего QIWI кошелька
3) Введите номер, ваш пароль и нажмите на кнопку оплаты
4) Нажмите на “оплатить с QIWI”, Вы будете перенаправлены на страницу с деталями платежа через QIWI
5) Введите номер ваш пароль и нажмите на кнопку оплаты
6) Ваш платеж будет обработан
7) Вы будете направлены на страницу с деталями заказа для подтверждения

Вы будете перенаправлены на сайт QIWI, чтобы произвести оплату с вашего QIWI Wallet.

1.Does TOMTOP check the products before shipping them to me?

Yes, for sure.
We have a professional Quality Control team. They will check carefully for each item we received from suppliers and manufacturers to avoid sending defective goods to our customers.
If a item is found defective in our QC test, it will be returned to the supplier / factory. So please don't worry about receiving a defective item because we are committed to being a trustworthy and reliable seller on international on-line shopping market.
 

2.Are Products Guaranteed / Is There A Warranty?

Yes, everything you buy from TOMTOP has a guarantee of quality and will exactly match the description on the website.
Factories that supply TOMTOP are strictly evaluated by us, and we provide you an even better reassurance of consistent high quality thanks to our in-house QC team. We double-check the contents of all orders carefully before dispatch to our customers. You can be confident about ordering from TOMTOP just as much as any western retailer.
 

3. How long dose it take to have my orders shipped after the payment is made?

1.Processing time 1-2 business days normally: During this period, we do strict quality-control tests and get the items carefully packed.
2.Sometimes the item in your order is really a hot seller and it may be just sold out at that time. It will take us 1-2 more days to get it available in stock again. In this case, The processing time will be 3 business days.
If you don’t receive any shipping confirming over three days after the payment is made, please kindly contact our customer service . They will check for you.
 

4. What should I do if my items arrived damaged?

Rarely, rough handling by the courier can lead to physical damage to your goods, e.g. broken screen.
If this has happened, please follow these steps:
If possible, raise a complaint directly with the delivery representative of the courier company before you sign for the goods. They will advise you on the complaint procedure.
If you already signed for the packet, take photos showing the damage and contact the local office of the courier/delivery company to complain. They will have a complaining procedure which will enable you to get compensation.
Next, contact TOMTOP immediately with your order number and a full description / pictures of the broken item issue. We will contact the courier company from our end.
Once the courier company confirms that the case is valid, they will compensate TOMTOP, and we will pass on this compensation to you. The compensation varies from case to case and is different for each delivery company. In some cases you will need to pay to post the broken item back to TOMTOP in order for us to send out a new piece.
 

5. What should I do if my products go broken after a period of use?

If you encounter quality issues within the warranty period, you can ask for us. Every product has a specific warranty period(If it is not stated in the product listing, contact us).

In this case, please kindly provide us with proof as below:
The photos of original TOMTOP package with front and back sides
The photos or video of the defective item(s)
The photos, video or screenshot showing the malfunction of the defective item(s)

We will usually offer you a refund or send a replacement as soon as the problem is confirmed.
Sometimes you may need to ship the defective item back to us for free repair service or a new replacement. Customer should cover the return shipping fee, and TOMTOP is responsible for the shipping costs of arranging reshipment by air mail.

Customer Reviews

There are no customer reviews yet.

  • 5 stars
  • 4 stars
  • 3 stars
  • 2 stars
  • 1 stars

Share your thoughts with other customers and get Tomtop Points, the first 5 reviews get DOUBLE Tomtop Points!

Write a Customer Review
Be the first to review this item

Hot Event More

Top Sellers More

Please activate your account and then to buy,We will resend the activation email to help you complete your registration.