GoolRC fast LiPo Battery charger board for DJI Phantom 2 Vision quadcopter, which increases the function of mutiple charging protection and can display battery voltage.
Features:
For original Phantom 2.0 charger:
Default charge battery one by one, if you want 3 batteries to be charged together, please open battery switch one by one(short press+long press)
For the third party charger:
The Voltage must be at least 12.6V, Otherwise the battery won't be fully charged
If your charger electric current >6A, DO NOT charge only one battery
If your charger electric current <5A, you need charge only one battery. Please put the battery on the first socket which close to the LED Light
Charger plate LED light on means power is ready
Battery under charging: Battery light-on
Battery full charged: Battery light-off
Using cement resistor to make the charge more stable
Specifications:
Net weight: 42g
Product dimension: 158 * 30 * 17mm
Color: black
Material: plastic, alloy
Rapid multi-battery charger plate,3 batteries charge at same time
Specially made for DJI Phantom 2 Vision battery
Support original Phantom 2.0 charger and the third party adapter
Add singlechip control, offer two grades charging mode
Notice: Stop using or charging the battery immediately whenever it swells up.
Do not discharge the battery with the current exceeding the max discharging current.
Never disassemble, punchture, shock, crash, or put the battery into the fire.
Improper usage, such as short circuit or overcharging might cause explosion or fire.
Package Information:
Package size: 15.5 * 12.5 * 2cm / 6 * 5 * 0.8in
Package weight: 52g / 1.8oz
Adhesive taps pa
ckage
Package List:
1 *
LiPo Battery Charger Board (Phantom Charger & Adapter are not included)