This voltage reference, with stable performance, is convenient for use. It can measure precise reference voltage of 10V and 5V. It's suitable for electronics enthusiasts, designers, etc.
Features:
It can measure precise reference voltage of 10V and 5V.
Built-in Lithium battery, convenient and portable for use.
With Micro USB interface, easy to charge.
Overcharge protection, no need to worry when in charging.
Adopts standard 4mm banana jack, test more convenient.
With indicators for power-on and charging.
High precision of key components.
When the battery is low for use, management chip will cut off the output automatically.
Operation:
The switch is a button with light, press first time, it will turn on; then press again, it will turn off.
Switch on for half an hour, the system will be more stable and get better results.
Three output interfaces, the middle one is COM interface, the left one is 10V interface and the right is 5V interface.
Notice:
Please charge the reference source at two months intervals if you don't use it for a long time.
Short circuit of output interfaces is not allowed, overload may burn the key components.
This is a voltage reference, it can't be used as a current reference.
Specifications:
Reference Voltage: 10V 5V
Accuracy: ±0.03% (±3mV)
Temperature Coefficient: 1.5ppm/°C -25°C~85°C
Max. Output Current: 10mA
Output Noise: Less than 6mV rms
Load Regulation: Less than ±50μV/mA when up to 10mA
Line Regulation: Less than 200μV/V
Min. Power: 12V AC
Indication: LED Indicator
Battery: Built-in Lithium Battery
Charge: Micro USB 5V
Operating Temperature: 0~40°C
Storage Temperature: -30~60°C
Working Altitude: 0-2000m
Product Size: 90 * 70 * 30mm / 3.54 * 2.75 * 1.18in
Product Weight: 111g / 3.92oz
Package Size: 14.5 * 12 * 3cm / 5.7 * 4.72 * 1.18in
Package Weight: 135g / 4.78oz
Package List:
1 * AD588 DC Voltage Reference
1 * USB Cable